Crate Engines | TBS Engines

TBS Engines offers crate engines, whether it is to get your vehicle refurbished or you want to hit the track, we can supply your next crate engine.

TBS Engines also has marine crate engines.

We can also offers installation of your new crate engine or just supply you the engine. Contact us today for more info!

Description:

• Dart Big M Sportsman Chevy Big Iron Block 4.600 Bore
• Eagle Forged Steel Crankshaft
• Eagle Steel H Beam Connecting Rods
• Mahle PowerPak Forged Pistons
• Mahle Performance Piston Rings
• Comp Lifters
• Comp Mech Roller Camshaft
    • 286/296 Duration @ .050
    • .748/.748 Valve Lift LSA 112
    • 5000-8500 RPM Band

$18,959.40 + GST
1 in stock

BUILD SHEET

Description:
• Performance World Cylinder Heads 320CC
• Eagle Internal Forged Steel CCW Crankshaft
• Eagle H-Beam Connecting Rods
• Icon Forged Pistons
• Comp Hyd Roller Camshaft Part# 11-456-8
     • 242/248 Duration @ .050
     • .566/.566 Valve Lift LSA 112
     • 2800-6200 RPM Band
• Comp Hyd Roller Lifters
• Comp Rockers
• ARP Head Bolts
• ARP Main Bolts
• ARP Intake Manifold Bolts
• Comp Timing Cover
• Edelbrock Victor JR Intake Manifold

~~$22,575.00~~
$20,000.00 + GST
1 in stock

Description:
• HP & Torque: 465 HP / 494 FT LBS
• Compression Ratio: 10:1
• Aluminum Heads
• Roller Cam
• Cast Steel Crank
• Forged Pistons

Block:
• Hand picked seasoned Magnum block
• Square and parallel decked
• Align honed main bearing bore
• Cylinders honed on computer controlled machine to within .0002 straightness and roundness
• Cylinders are sonic tested for thickness
• 2-Bolt Main
• 4.000" Bored .040" over
• 2-Piece Rear Main Seal
• Mech fuel pump provision: Yes

Rotating Assembly:
• New Steel crankshaft
• 4.000" Stroke
• Forged Magnum 6.123" connecting rods w/ 150,000 psi bolts
• Forged pistons
• External

Cylinder Heads:
• BluePrint Engines Assembled and Machined Edelbrock 61769 Casting
•Aluminum Magnum Pattern Cylinder Heads - 58cc chamber
•Aluminum Roller Rockers
•2.02" intake/1.60" exhaust valves
•176cc intake/75cc exhaust runners

Cam Specs:
• Cam Type: Roller
• .580 Intake .577 Exhaust
• 236 Intake / 242 Exhaust duration
• @ .050 - 110 degree lobe separation

Ignition Timing:
• 34 degrees total at 4000 RPM

Also Includes:
• Valve covers, Oil Pan and Timing cover
• Standard Rotation Driver Side Inlet Water Pump
• Plugs, Wires & Distributor
• Thermostat & Water Neck
• Fuel Pump & Fuel Line
• Harmonic Balancer & Air Cleaner
• Dyno Test Results shipped With Engine

Notes:

• If installing with a Manual Transmission with .750" input shaft, Recommended Pilot bearing is PN FC-69907. Recommended Pilot OD is 1.81"

TBS ENGINES CRATE ENGINES